Topp Music Gear TPS BETA1152, Руководство пользователя

Страница: 13 / 22

4 12
For Passive Speaker Cabinets
Please use only the power connectors to make connections with other signal source
equipment for the passive speaker cabinets. The power connector has four terminals: 1+,
2-, 2+, 2-.
For TPS BETA 1152 / 2152, with the “MODE SWITCH” on BI-AMP position, 1+ / 1- used to
connect with the Low Frequency, 2+ / 2- used to connect with High Frequency.
F or Active Speaker Cabinets
As to these circumstances, audio connections is mostly intended for the signal flow, so,
determine the wire configuration according to your real application system and its
connecting facility. Normally, you have the following choices:
For TPS BETA 1152 / 2152, with the “MODE SWITCH” on Full Range position & TPS BETA
SUB Series, 1+ / 1- used to connect the S / Speaker -, 2+ / 2- not used.
6
TOPP PRO
MUSIC GEAR
Wire Connections
5 13
TOPP PRO
MUSIC GEAR
7
TECHNICAL SPECIFICATIONS
Model
System type
Crossover Modes
Crossover Frequency
Power Rated
Nominal Impedance
Sensitivity (1W,1m)
Maximum SPL 1mt
Frequency Response
Low-Frequency Device
High-Frequency Device
HornCoverage (Hº x Vº)
High Frequency Protection
Connectors
Enclosure
Dimension (H x W x D)
Net Weight
Volume
TPS BETA 1152
2-Way Vented Box
Bi-amp / Full-range, externally switchable
1.8 kHz
LF/Full-range: 8 ohms / HF: 8 ohms
Passive: 99dB / LF: 99.5dB / HF: 108dB
125dB (Calculated)
38Hz ~ 18KHz (-6dB)
15” 402mm - 3" Voice Coil
2" Compression Driver - 3” Voice Coil
90º x 60º
Electronic Dynamic Protection (both two modes)
2 x SPK4 (Pin1+; Pin1-; Pin2+; Pin2-)
Textured black paint-black perforated Steel-12xM8 Flying points
867 x 497 x 600mm (34.13" x 19.57" x 23.62")
79.81 lbs / 36.2 kg
14.67 CFT
LF/Full-range: 400W Continuous 800W Peak
HF: 100W Continuous 200W Peak / LF/Full-range: 8 ohms
Ø
Model
System Type
Amplifier Continuous Power
Amplifier Program Power
Sensitivity at 1mt
Max SPL at 1mt
Frequency Response
Input Sensitivity
Input Impedance
Horn Coverage (Hº x Vº)
Connectors
Subsonic Filter
Protections
External Control
Power Supply
Enclosure
Dimension (H x W x D)
Net weight (lbs/kg)
Volume
TPS BETA 1152A
2-Way Bi-amp Active Vented Box
LOW: 500 W / HIGH: 150W
LOW: 1000 W / HIGH: 300W
997 dB
126 dB
38Hz - 18kHz (-6db)
Line 0dB
30K ohms Balanced - 15K ohms Unbalanced
90º x 60º
Combo input XLR / Link / Line - Mix output on XLR
30Hz at 24dB/oct
EQ (MUSIC-FLAT-VOCAL) - Volume - Ground Switch
220 Volt / 110 Volt 50/60Hz
Textured black paint-black perforated Steel-12xM8 Flying points
867 x 497 x 600 mm (34.13" x 19.57" x 23.62")
97.44 lbs / 44.2 kg
14.674 CFT
Soft-Start, compressor, High Frequency Electronic Dynamic Protection