Topp Music Gear TPS 16A.UB, Руководство пользователя

Страница: 6 / 10

4
6
TPS 16AM.UB
1- THE MONO INPUT CHANNELS
2- PHANTOM POWER SWITCH
3- TAPE IN/3.5mm jack
4- TAPE OUT
5- LEVEL CONTROL
6- DSP/FX-AUX
These are marked CH1 to CH3 and include a balanced COMBO
socket (MIC IN). Use the COMBO socket to connect a low
impedance balanced dynamic microphone or a low level signal.
You can also connect a condenser microphone into the
COMBO socket.
When the (2) switch is at ON position, a +15V phantom power
will be applied to CH1 through CH3.
Only Condenser microphones need Phantom Power, so switch it
OFF when you use dynamic microphones.
Here you can connect a stereo Line Level via RCA sockets. Usually
this stereo channel will be used to connect into the TPS 16AM.UB
with the audio output of a Computer, or a CD Player, iPOD, MP3
player, etc.
Via these two RCA sockets you can route out the
Main Stereo signal usually to a Tape Recorder or
DAT Recorder.
It adjusts the LEVEL of individual channels with a range from
-
to +10dB.
This control is used to adjust the level of respective channel signal sent to the Aux Bus. The
configuration is post-fader so the signal sent to AUX Bus will be affected by the LEVEL control
of that particular channel. In this typical compact unit, the channel signal is not only assigned
to external effect or processor equipment directly but also to internal digital multi-effect.
Technical Specification
Model Active TPS 16A.UB
System Type 2-Way 6.5" Vented Active Speaker Cabinet
Power Handling RMS-70Watts Program-140Watts
Frequency Response
75Hz-20KHz (-6dB)
Sensitivity
110dB Max
Low Frequency 6.5"(165mm)woofer/1" Voice Coil
1" Neodymium Tweeter
Connectors
MIC/LINE blanced input at -40/0dB (Combo Connector)
AUX input at -10dB with RCA Connector
LINK Output at -40/0dB with XLR
High Frequency
6KHz@12dB/oct X-over Frequency
Amplifier
Electronic Protections Thermal/overload/angalog limiter
Class D 70Wx2(BTL)
Volume Control Continuous, work only on MIC/LINE input
Power Supply 110-120V / 220-240V~50/60Hz
Enclosure
Trapezoidal painted wood cabinet.metal grille
Fixing Point
2xM4 Standard(2xVertical side)
Dimensions(H*W*D)
12.52"(318mm) x 7.87"(200mm) x 7.93"( 201.5mm)
Net Weight
13.05 lbs/4.6Kg
Volume
1.19CFT
11
15
Model Active TPS 16P
System Type 2-Way 6.5" Vented PASSIVE Speaker Cabinet
Power Handling RMS-70Watts Program-140Watts
Frequency Response 75Hz-20KHz (-6dB)
Sensitivity
110dB Max
Low Frequency
6.5"(165mm)woofer/1" Voice Coil
1" Neodymium Tweeter High Frequency
6KHz@12dB/oct X-over Frequency
Enclosure
Trapezoidal painted wood cabinet.metal grille
Fixing Point
2xM4 Standard(2xVertical side)
Dimensions(H*W*D)
12.52"(318mm) x 7.87"(200mm) x 7.93"( 201.5mm)
Net Weight 13.05 lbs/4.2Kg
Volume
1.19CFT