@2019topotek All Rights Reserved.
3
1. Product Introduction
TGIP10A, a great 3-axis gimbal for model aircraft enthusiasts, It provides a 10×optical
zoom.The 1/3 CMOS sensor supports approx.4 million effective pixels. With unique internal
wiring design, built-in IMU gimbal control module, specialized servo drive module, Network
IP output mode. And it can be widely applied to various model aircraft activities and
entertainments.
2. Product List
Gimbal ×1
With unique internal wiring design, built-
in IMU gimbal control module,
specialized servo drive module
Power &UART control
Network & SBUS Control Wire
Gimbal debug Micro-USB cable
(No standard parts, buy separately)
Micro-SD
存储卡
(No standard parts, buy separately)
3. Mounting & Configuration
3.1 Gimbal installation attention
1.pls don't hang on the frame when you not used gimbal
，
Long-term suspension will
accelerate damper deformation led to the decrease of the damper that jelly appearance
；
2.Pls regular
（
7days
）
replace the gimbal damper
（
6pcs spare parts free
）
3.Mount Gimbal installation the rod
，
hanging hook and suspension plate must be
maintained between the absolute vertical and parallel to each other
（
as show bellowing
），
wrong installation will cause the deformation of damper to lower then lead to suspension
effect
。
4.When the gimbal connect HD transmission equipment
，
if the picture can't normal to
the display device
，
pls checking:
①
.
First, connect the Gimbal network interface directly to the PC or local hub. Open the
special ground station software, and see whether the picture is normal after the equipment is