Topmodel Precision Products micro Bullit Скачать руководство пользователя страница 2

2

MERCI

 d’avoir choisi l’aile volante à construire 

micro BULLIT PRECISION PRODUCTS!

Nous avons fait un grand effort en dessinant et construisant cette aile pour qu’elle soit le meilleur modèle que vous ayez jamais construit et 

fait voler. 

Nous vous fournissons un kit à construire avec la plus haute qualité et les meilleures performances possibles.

Nous vous souhaitons un grand succès en construisant et en faisant évoluer votre nouvelle 

micro BULLIT PRECISION PRODUCTS.

Petite aile volante très facile à construire et hyper ludique à faire voler

C’est la digne descendante de nos célèbres BULLIT, en version micro!

Elle se construit en une ou deux soirées et est vraiment économique.

Elle évolue dans un mouchoir de poche, super maniable et joueuse.

Elle n’est pas vicieuse pour un sou!

Elle sait accélérer quand on lui demande.

Elle se comporte étonnamment bien dans un vent soutenu malgré sa faible masse!

Elle vole plus de 10 minutes avec l’accu proposé.

Elle se pose facilement à faible vitesse.

Elle se transporte aisément toute montée, prête à voler.

Elle vole (presque) par tous les temps et partout!

 Cette micro BULLIT se construit sans dons particuliers, à partir du moment où vous êtes soigneux et que vous suivez la notice illustrée 

pas à pas, qui vous dit absolument tout de A à Z. Le montage est rapide, comptez une ou deux soirées seulement avant d’être prêt pour le 

premier décollage.

Elle se contente de quelques chutes d’Oracover® pour l’entoilage!

IMPORTANT:

  Merci de bien vouloir lire et étudier cette notice de montage avant de commencer l’assemblage. Faire l’inventaire des pièces à 

l’aide de la nomenclature pour contrôler qu’il n’y a pas de manquant ou d’imperfection. 

Merci de contacter immédiatement TOPMODEL si vous constatez une pièce manquante ou une pièce endommagée.

GARANTIE:

  Il est important de notifier à TOPMODEL tous dommages ou problèmes avec ce modèle dans les 14 jours suivant la réception du 

kit pour bénéficier de la garantie. En cas de retour du modèle, le client est responsable du transport et le port retour est à sa charge. En cas 

de défaut, la pièce sera échangée ou remplacée une fois que celle-ci sera réceptionnée par TOPMODEL pour expertise (transport à la charge 

du propriétaire). En cas de problème, n’hésitez pas à contacter TOPMODEL.

TOPMODEL ne peut pas contrôler la dextérité du modéliste et ne peut pas influencer le constructeur durant l’assemblage ou l’utilisation de ce 

modèle radio-commandé.  Aussi, nous ne pouvons, en aucun cas, être tenus responsables des dégâts matériels, accidents corporels ou décès 

pouvant être causés par ce modèle réduit.

L’acheteur/utilisateur accepte toutes les responsabilités en cas de problèmes structurels ou mécaniques.

THANK YOU

 for your purchase of the laser kit of the flying wing 

micro BULLIT PRECISION PRODUCTS!

We made a main effort while drawing and building this plane so that it is the best model you ever built and fly. 

We provide you a kit with the highest quality and the best possible performances. 

We wish you a great success while assembling and flying your new 

micro BULLIT PRECISION PRODUCTS.

Small flying wing very easy to build and hyper cool to fly

She is the worthy descendant of our famous BULLIT, in micro version!

She is built in one or two evenings and is really economical.

She flies in a pocket handkerchief, super maneuvrable and playful.

She is not vicious for a penny!

She can speed up when asked.

She behaves surprisingly well in a sustained wind despite her low weight!

She flies more than 10 minutes with the recommended battery pack.

She is super easy to land at low speed.

She is easily transportable, all assembled, ready to fly.

She flies (almost) in all weather and everywhere!

The micro BULLIT is assembled without special gifts, from the moment you’re careful and you follow the construction manual illustrated step by 

step, telling you everything from A to Z. Assembling is fast, count one or two evenings before being ready for the maiden flight.

You only need some falls of Oracover® for covering her!

IMPORTANT:

  Please take a few moments to read this instruction manual before beginning assembly. Do an inventory of the parts using the 

parts list, to control that there is no lack or imperfection. 

Thank you to contact TOPMODEL immediately, if you note a missing part or a damaged part. 

WARRANTY:  

It is important to notify to TOPMODEL all damage or problems with this model within 14 days following the reception of the kit to 

be able to benefit the warranty. In the event of return of the model, the customer is responsible for transport and return shipping cost is at his 

expenses. In the event of defect, the part will be exchanged or replaced once this one will be delivered to TOPMODEL for expertise (transport 

on your cost). In the event of problem, do not hesitate to contact TOPMODEL. 

TOPMODEL cannot control the dexterity of the modeler and cannot influence the builder during the assembly or the use of this 

radiocontrolled model, thus TOPMODEL will in no way accept or assume responsability or liability for damages resulting from the use of this 

user assembled product.

The purchaser/user accepts all the responsabilities in the event of structural or mechanical problems.

Содержание Precision Products micro Bullit
























Отзывы: