TOPMAQ TW08 MINI, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 52

27
Inspection of engine oil level ―――-every day
Change of engine oil ―――every 500 h
Change the engine oil filter ―――every 500 h
1. Start up the engine to preheat the engine oil properly.
2. Park the vehicle on flat ground.
3. Lower the bucket onto the ground.
4. Idle the engine at low speed for 5min.
5. Turn the ignition switch to OFF and then remove the key.
6. Take off the drain plug to have oil pass through a clean cloth into a 2L container.
7. After that, check if there is metal debris or other dirt left on the cloth.
8. Put the drain plug back on and tighten it.
9. Loosen the drain plug to have oil flow through the filter cylinder into a container.
10. Take off the screws fixing the engine oil filter elements with a screwdriver in order to take the filter element
out.
11. Reinstall the new filter and tighten the screws fixing the new element with a screwdriver.
12. Remove the oil filter cap to add the recommended oil into the engine. After 15 min, check if the oil level is
between the circle markers.
13. Put the oil filler cap back on.
14. Shut down the engine and unplug the ignition key.
15. Check if the drain plug is leaking.
16. Check the oil level on the dipstick.
Caution: keep your body and face away from the breather. When gear oil is still hot, please wait until
it cools down and then slowly release the breather pressure!
C. Hydraulic system
Parts Quantity
Interval (h)
10 50 100 250 500 1000 1500 2500 4000
Check the hydraulic oil level 1
★
Clean the drain pipe of
hydraulic oil reservoir
1
★
Change the hydraulic oil. 16.5L
★
Change the hydraulic oil
suction filter elements
1
★
Check the
hose and
pipeline
--
★
--
★
Change the hose 39
★
Note:
★
normal maintenance interval