15
How to operate
Detergent
Detergent works under low pressure and can not be injected under high pressure.
Notice
!
Adjust the pressure
1. Install the black spray nozzle.
2. Install the injector to the pump.
3. Put injector strainer into the detergent container.
Detergent: water 1:10
4. After use, put the injector into clean water to clean off the detergent because any
remained detergent possibly damages the pump.
1. Far away the gun to the surface you want to clean, longer distance and less water
pressure you will get.
2.Reduce the engine rotating speed, lower engine rotating speed means lower water
pressure.
3. Use the white spray nozzle, larger spray area, and lower spray pressure you will get.
4. Adjust the pressure switch on the pump, turning switch anti-clockwise will reduce the
pressure. Place the switch back after use.
Warning
!
Pressure washer has already been adjusted to the most suitable pressure in factory and
lower pressure can be achieved through following ways:
Do not attempt to increase the pump pressure, otherwise it might damage the machine
and hurt the person.
