13
Pre-operation
water heater check
Check fuel type is same or not as on nameplate appointed. Install two 1# dry cells for the
water heater.
Notice
!
Water pressure is the switch to turn on the water heater, so when it is lower than
0.02Mpa, water heater can not be started.
If relief valve drops water, it is normal, it is for protecting the water heater from too high
water pressure.
When the outlet water temperature exceeds heat protector appointed temperature value,
the water heater will be shut down automatically, it is normal, please re-adjust the
outlet water temperature and restart.
Please check the flame from Flame Observation Window, if no flame please trigger back
the gun, and trigger again till water heater works normally
MIN
MAX
Flame Observation Window
Temperature Adjustor