Topion RX1100 Series, Руководство пользователя

Страница: 18 / 31

AV Cable Jack
LED indication
In operation
Bottom LED
(blue)
GPS
reception
Upon selecting
“continuous recording”
Blinking
(in every
second)
Upon receiving
impact from
“G-sensor” or
after pushing “manual
recording button”
Blinking
(in 0.5
second)
Recording
mode
Continuous
Emergency /
Manual
○
○ ○
○
× × × ×
×
× ×
×
○ ○ ○ ○
Rear LED
(red/green)
Red LED blinking
(in every second)
Green LED
blinking
(in every second)
Green LED
blinking
(in every second)
Red LED blinking
(in every second)
During emergency or manual recording stand-by, rear LED is either blinking
in red(with no GPS reception) or in green(with GPS reception), while
bottom LED is blinking in blue.
Things to Know Before Use
Things to Know Before Use
Main input
Input for monitor (GPS navigation)
No Signal No Signal
You are able to connect AV cable to the device in which it uses same pin map, and supports
AV output port.
However, please check it before, as each device might use different pin map.