Topfloor TF100R-TRS, Руководство оператора

Страница: 26 / 40

24 TF100-TRS
5.10 Setting the Main Brooms
Sweeping Contour Adjustment
For best cleaning results and to ensure the highest possible device effi-
ciency, the Main Brooms are equipped with a sweeping contour. The
sweeping contour should be set to approx. 30-40 mm at the rear roller.
Establishing the Sweeping Contour:

Drive the ride-on-suction-sweeper to an area to be cleaned.

Switch on the Main Brooms without moving the sweeping machine.

Allow the Main Brooms to run for about one or two minutes without
moving.

Lift the Main Brooms.

Stop Main Brooms operation and drive forward a few meters.

The sweeping track visible on the ground is the sweeping contour.
Adjusting the Sweeping Contour

Park the suction sweeper as described.

Take the key out of the key-operated switch.

Lift the Main Brooms and arrest the lowering lever of the Main
Brooms

Let the lever snap in arresting position.

Open the hood.

Secure the hood position by the hood arresting device.

Remove the right side trim panel facing in the direction of motion.
1 Bowden pull wire 2 threading rod
3 counternut A 4 counternut B
5 spring