Topfloor TF100R-TRS, Руководство оператора

Страница: 22 / 40

20 TF100-TRS
5.6.2 Mounting the cover
To mount the cover, please proceed as follows:
Reach below the driver's seat and grasp the rear edge of the cover.
Lift the cover.
Place the cover on the ride-on-suction-sweeper.
Make sure that the front edge of the cover lies on the keep-off plate.
Make sure that the lateral guiding pins of the cover are fitted correctly in
the frame.
If the cover is not fitted correctly, the machine will not run.
5.7 Lifting the hood front
You can lift the hood front for maintenance and repair work.
5.7.1 Lifting the hood front
To lift the hood front part, please proceed as follows:

Pull the key out of the key-operated switch.

Remove the knob of the parking brake.

Unscrew the upper parts of the brake pedal and the accelerator
pedal.

Lift the complete hood front.

Secure the hood front against falling down by tying it to the steering
wheel.
5.7.2 Mounting the hood front
To mount the hood front, please proceed as follows:

Loosen the fastening between the hood front and the steering
wheel.

Direct the hood front along the steering rod towards the bottom.

Fit the hood front tightly into the machine frame.
Make sure the rear edge of the casing lies on the keep-off plate.

Assemble the upper parts of the brake and accelerator pedal.
Make sure that the upper parts fit correctly. Assemble the upper parts in
such a way that the accelerator pedal will be directed away from the
steering column and the brake pedal will be directed towards the steer-
ing column.

Assemble the knob of the hand brake.