Topfield TF4000FI, Руководство по обслуживанию, Страница: 40 / 62

1999 Nov 11 6
Philips Semiconductors Preliminary specification
Low power audio DAC UDA1334TS
7 PINNING
Notes
1. 5 V tolerant is only supported if the power supply voltage is between 2.7 and 3.6 V. For lower power supply voltages
this is maximum 3.3 V tolerant.
2. Because of test issues these pads are not 5 V tolerant and they should be at power supply voltage level or at a
maximum of 0.5 V above that level.
SYMBOL PIN PAD TYPE DESCRIPTION
BCK 1 5 V tolerant digital input pad; note 1 bit clock input
WS 2 5 V tolerant digital input pad; note 1 word select input
DATAI 3 5 V tolerant digital input pad; note 1 serial data input
V
DDD
4 digital supply pad digital supply voltage
V
SSD
5 digital ground pad digital ground
SYSCLK 6 5 V tolerant digital input pad; note 1 system clock input
SFOR1 7 5 V tolerant digital input pad; note 1 serial format select 1
MUTE 8 5 V tolerant digital input pad; note 1 mute control
DEEM 9 5 V tolerant digital input pad; note 1 de-emphasis control
PCS 10 3-level input pad; note 2 power control and sampling frequency select
SFOR0 11 digital input pad; note 2 serial format select 0
V
ref(DAC)
12 analog pad DAC reference voltage
V
DDA
13 analog supply pad DAC analog supply voltage
VOUTL 14 analog output pad DAC output left
V
SSA
15 analog ground pad DAC analog ground
VOUTR 16 analog output pad DAC output right
handbook, halfpage
UDA1334TS
MGL878
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
VOUTR BCK
VSSA WS
VOUTL
DATAI
VDDA VDDD
Vref(DAC) VSSD
SFOR0 SYSCLK
PCS SFOR1
DEEM MUTE
Fig.2 Pin configuration.