5.4 Making timer events 37
To see detailed information of a desired programme, put the
highlight bar on the programme with the
c
or
a
button and
press the
button. To switch to another service, press the
b
or
d
button.
You can travel over previous days with the
F2
button, and can
travel over next days with the
F3
button.
To see the programme guide for radio broadcasts, press the
button. To switch it back, press the
button again.
Pressing the
F1
button will rearrange the form, swapping the
columns and rows. To switch it back, press the
F1
button
again.
You can make a timer event on the electronic programme guide
as follows:
1. Select a service you want.
2. Press the
EPG
button to display its programme guide.
3. Select a programme you want with the
OK
button, then
P
is marked up on the entry. At the same time, a timer
event with the selected programme will be made in the
timer list. Refer to §
5.4
for the timer list.
4. To remove the marking, press the
OK
button once again.
5.4
Making timer events
You can make your desired service to be presented at a specific
time. Even if the digital receiver is in standby mode, it will
switch into active mode at a specified time. And it will switch
back into standby mode again after the specified duration.
