33
7. APPLIED OPERATIONON
5. Confirm that self-leveling is complete and that the laser
beam is emitting.
Press either of
key once and the laser beam
will move in the direction of the key to begin search.
The
key cannot be used until self-leveling is
complete and the laser beam starts emitting.
6. Pressing either of
key pressed in step 6 again
will stop the movement of the laser beam.
If neither of
key is pressed, the laser beam will
return to the central area.
7. Press either one of the
key to move the beam
right or left until it is precisely aligned to reference point B.
The speed of laser beam movement will change according
to the duration of time the
key is being pressed.
(The speed will change from low to high speed.)
Direction of laser beam movement when operating
key
*Display during arrow key operation
When readjusting with line control, return to step 4 and follow directions thereafter. In such a case, however,
skip steps 5 and 6.
• During the vertical rotation or the manual line control, the laser beam will emit even if self-leveling starts.
• This mode can be used with "Laser Manager".
Key
Display*
Direction of laser beam movement
X-
X-
X+
X+