Topcon RL-HV Series Скачать руководство пользователя страница 26

Страница: 26 / 55

6. BASIC OPERATION

Using

Bluetooth

communication, RL-HV can be remotely controlled by devices such as iPhone and Android.

The control application "Laser Manager" would be better installed on your device in advance.



•

Bluetooth

function may not be built in depending on telecommunications regulations of the country or the area

where the instrument is purchased. Contact your local dealer for the details.

• When connected with a device, the connection is held until the time mentioned below.

• When canceling the connection from the device;

• When pairing is performed with any other device.

• If RL-HV is not displayed during the pairing search in Laser Manager, please complete pairing on the OS.

After that, please do pairing again by Laser Manager.

• When pairing with some instruments on Laser Manager,

Bluetooth

connection between instrument and Laser

Manager may take some time. Please remove unnecessary instruments from

Bluetooth

connection history

list on Laser Manager.

• After disconnecting

Bluetooth

by Laser Manager, the instrument icon may not be displayed on the search

screen. Please wait for a while and re-enter the

Bluetooth

connection screen again.

■

Installing Laser Manager

There are two ways to install Laser Manager:
• Scan the QR code according to the instructions of the included "Laser Manager guide".
• Search for "Laser Manager" on the App Store or Google Play.



For details on App Store and how to install this application, see the Apple support home page

(https://support.apple.com).



For details on Google Play and how to install this application, see the Google support home page

(https://support.google.com).

PROCEDURE Communication between the RL-HV and your device

1. Turn on the RL-HV.

The RL-HV automatically enters the standby state for

Bluetooth

connection.

2. Turn on "

Bluetooth

" on your device.



For details, see the instruction manual of the device

you are using.

3. Tap the icon

on your device to start up Laser

Manager and connect to the RL-HV.



About the pairing method, see the instruction manual

of the device you are using.

6.3

Bluetooth

Connection

Содержание RL-HV Series























































Результаты поиска

Содержание RL-HV Series

Отзывы:

Topcon RL-HV Series, Инструкция по эксплуатации, Страница: 26 / 55

Результаты поиска

Содержание RL-HV Series

Отзывы: