Topcon RD-80SA, Инструкция по эксплуатации

Страница: 54 / 70

52
4.3.21 RF_# Command
This command instructs the instrument to send the correction factor data in specifying correction
factor number.
Receive data
：
Correction factor for X filter
→ Correction factor for Y filter → Correction factor for Z filter
Valid value range
：
0.01-100.0
PC
Command RD-80SA
“RF_5”+CR+LF
“OK”+CR+LF
“3.46.6.”+CR+LF
“1.689”+CR+LF
“0.012”+CR+LF
“END”+CR+LF
4.3.22 CF_# Command
This command instructs the instrument to Initialize the correction factor data (Correction factor value to
be 1.0) in specify correction factor number.
Valid value range
：
0 - 10
PC Command RD-80SA
“CF_#”+CR+LF
Initialize
“OK”+CR+LF
※
0: When specify
“0”, all correction factor data are initialized.
4.3.23 BR_# Command
This command sets the communication speed of RS-232C communication in the instrument
Valid value range 0
：
9600 1
：
19200 2
：
38400
PC Command RD-80SA
“BR_#”+CR+LF
“OK”+CR+LF