Topcon RD-80SA, Инструкция по эксплуатации

Страница: 52 / 70

50
4.3.15 SR_# Command
This command sets common measurement range in [RANGE ALL]
Valid value range
：
1 - 8
PC Command RD-80SA
“SR_#”+CR+LF
“OK”+CR+LF
4.3.16 FO_# / FX_# / FY_# / FZ_# Command
This command sets the measurement range for each filter in [RANGE EACH]
FO
：
OPEN FX
：
X2 filter FY
：
Y filter FZ
：
Z filter
Valid value range
：
1
– 8
PC Command RD-80SA
“FO_#”+CR+LF
“OK”+CR+LF
※
Above is example of
”FO” command
4.3.17 MF_# Command
This command sets the type of filter
Valid value range 0
：
OPEN 1
：
X2 filter 2
：
Y filter 3
：
Z filter 4
：
XYZ filter
PC Command RD-80SA
“MF_#”+CR+LF
“OK”+CR+LF