Topcon i-33, Быстрый старт

Страница: 19 / 46

Getting Started
16 P/N: 1003052 ‐ 01
• • • • • •
Getting Started
Creating a Machine Configuration File (X-32/X-33 Only)
The following briefly describes creating a machine configuration file and calibrating a bucket for X ‐ 32 and X ‐ 33 systems only.
For a detailed procedure, see the 3D ‐ MC Reference Guide P/N 7010 ‐ 0911 .
Machine Setup
1. On the GX ‐ 30, press the Topcon Menu Button
and tap Control

Machine setup in 3D ‐ MC.
2. Tap New to begin creating a machine
configuration file. The Configuration
name/type screen appears.
3. Set up the machine name and type, and tap
Next (Figure 12).
4. Set up the position and sensor inputs of the
machine, and tap Next .
5. Configure the antenna mounting position and
heights, and tap Next .
6. Set up the sensors for the frame, stick, dog ‐
bone, and bucket, and tap Next . The Excavator
Buckets screen appears.
Figure 12: Machine Configuration