Topcon GMS-2 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 108

background image

Terms and Conditions

P/N 7010-0752

vii

non-transferable license to use such Software under the terms stated
herein and in any case only with a single receiver or single computer.
You may not assign or transfer the Software or this license without
the express written consent of TPS. This license is effective until
terminated. You may terminate the license at any time by destroying
the Software and Manual. TPS may terminate the license if you fail to
comply with any of the Terms or Conditions. You agree to destroy the
Software and manual upon termination of your use of the receiver. All
ownership, copyright and other intellectual property rights in and to
the Software belong to TPS. If these license terms are not acceptable,
return any unused software and manual.

CONFIDENTIALITY

This Manual, its contents and the Software

(collectively, the “Confidential Information”) are the confidential and
proprietary information of TPS. You agree to treat TPS’ Confidential
Information with a degree of care no less stringent that the degree of
care you would use in safeguarding your own most valuable trade
secrets. Nothing in this paragraph shall restrict you from disclosing
Confidential Information to your employees as may be necessary or
appropriate to operate or care for the receiver. Such employees must
also keep the Confidentiality Information confidential. In the event you
become legally compelled to disclose any of the Confidential
Information, you shall give TPS immediate notice so that it may seek a
protective order or other appropriate remedy.

WEBSITE; OTHER STATEMENTS

No statement contained at the

TPS website (or any other website) or in any other advertisements or
TPS literature or made by an employee or independent contractor of
TPS modifies these Terms and Conditions (including the Software
license, warranty and limitation of liability).

SAFETY

Improper use of the receiver can lead to injury to persons or

property and/or malfunction of the product. The receiver should only
be repaired by authorized TPS warranty service centers. Users should
review and heed the safety warnings in an Appendix.

GMS-2_OM_Book.book Page vii Friday, December 28, 2007 1:47 PM

«
...
7
8
9
10
11
...
»

Содержание GMS-2













































































































Отзывы:

Нет отзывов

Похожие инструкции для GMS-2

Бренд: Garmin Страницы: 5

Бренд: Haicom Страницы: 41

Бренд: CalAmp Страницы: 22

Бренд: Navigon Страницы: 80

Бренд: Memory-map Страницы: 66

Бренд: Navitel Страницы: 217

Бренд: EKT Страницы: 7

Бренд: Boomerang Страницы: 2

Бренд: TomTom Страницы: 5

Hands-Free Car Kit

Бренд: TomTom Страницы: 14

Бренд: TomTom Страницы: 30

Бренд: TomTom Страницы: 36

Бренд: Becker Страницы: 62

Бренд: TI Страницы: 90

Бренд: SkyCaddie Страницы: 16

Бренд: InvenSense Страницы: 14

Бренд: Geneq Страницы: 13

Бренд: Safe Fleet Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды