1. Press [ANG].
2. Collimate the first target "A".
3. Set the horizontal angle of target "A" to
0°00'00".
Press the
[0SET]
and press the
[YES]
.
4. Collimate the second target "B".
The horizontal angle and vertical angle of target "B",
which you want to know, are displayed.
V : 80°30'15"
HR: 120°30'40"
0SET HOLD HSET P1
↓
H ANGLE 0 SET
> OK?
--- --- [YES][NO]
V : 80°30'15"
HR: 0°00'00"
0SET HOLD HSET P1
↓
V : 80°30'15"
HR: 132°40'20"
0SET HOLD HSET P1
↓
1. Collimate the target center.
Make sure that setting is applicable to the measure-
ment conditions.
2. Press [
].
Distance measurement (Continuous measuring)
starts.
• Distance measurement mode can be switched
between continuous measurement/N-time mea-
surement by pressing
[MEAS]
during a distance
measurement. Current mode is displayed in [ ].
The results of the measurement are displayed.
Hereafter, the results are updated whenever measure-
ment is performed.
Pressing the
[
]
key again, the display
changes to
horizontal (HR) and vertical (V) angle
and slope distance
(SD).
• Pressing trigger key located on the side of the instru-
ment will perform exactly the same operation with
[MEAS]
.
V : 90°10'20"
HR: 120°30'40"
0SET HOLD HSET P1
↓
HR: 120°30'40"
HD*[r] << m
VD: m
MEAS MODE NP/P P1
↓
HR: 120°30'40"
HD*
131.677 m
VD: -0.396 m
MEAS MODE NP/P P1
↓
V : 90°10'20"
HR: 120°30'40"
SD* 131.678 m
MEAS MODE NP/P P1
↓
Trigger key
Angular Measurement
Target “A”
0°00'00"
Display Functions
Target “A”
Target “B”
0°00'00"
132°40'20"
Horizontal angle
Distance Measurement
࣭
Press the Starkey [ ], and the Starkey mode is accessed.
In the Starkey mode, it is possible to change the setting
item that is frequently used during measurement.
Measuring screen
Input screen
Menu screen
Tilt screen
Remaining battery power
Target
Prism
(No display)
Reflectorless
Reflective sheet
Laser-pointer function
(blinking): Laser-pointer is selected and ON.
Measurement is possible.
The power is poor.
Measurement is impossible.
¨Âìéîëéîç©
¨Âìéîëéîç©
Other displays
disappear.
Î
Ð
N
P
Angle measurement mode
Distance measurement mode
: Bluetooth communication status
V : 80 30'15"
HR: 120 30'40"
0SET HOLD HSET P1
HR: 120 30'40"
HD* 131.677 m
VD: -0.396 m
MEAS MODE NP/P P1
Page number (Next page exists.)
Horizontal distance
Horizontal angle
Relative elevation
Vertical angle
Horizontal angle
Softkey
(This symbol mark of the Bluetooth will be displayed when the total
station is in the sate which can be communicated by Bluetooth.)
X -1'40"
Y 2'20"
EXIT
SELECT A FILE
FN:__________
ALP SPC CLR ENT
Status screen
HR: 120 30'40"
HD*[r] -<<< m
VD: m
MEAS MODE NP/P P1
MENU 1/4
F1:TOP FIELD
F2:DATA COLLECT
F3:LAYOUT P
GM-103
S/N XX123456
VER. X.XXXX_XX
P
Laser is emited
[NUM] / [ALP]
Measurement mode
Electric circular level
Switch between numeric
and alphabetic characters.
(Special mode)
Starkey [ ]
Enter key [ENT]
[ ]
[B.S.]
[ ]
[0] [ ] [ ]
[1] - [9]
Power key [ON]
Illumination key [ ]
[ ][ ][ ]
[ESC]
[FUNC]
Selector key for softkeys
Display unit
V : 80 30'15"
HR: 120 30'40"
0SET HOLD HSET P1
N
P
Nomenclature
2
1
6
4
3
5
7
8
9
11
10
12
13
14
15
2
16
19
17
18
21
20
22
24
23
25
26
27
1
Handle
2
Instrument height mark
3
Battery cover
4
Operation panel
5
Serial connector /
Combined communications
and power source connector
(Low Temperature Model)
6
Circular level
7
Circular level adjusting screws
8
Base plate
9
Levelling foot screw
10 Optical plummet focussing ring
11 Optical plummet eyepiece
(10,11: Not included on instruments
with laser plummet)
12 Display unit
13 Guide light
14 Objective lens (Includes Laser-
pointer function)
15 Handle locking screw
16 Tubular compass slot
17 Vertical clamp
18 Vertical fine motion screw
19 Trigger key
20 External interface hatch (USB port/
Reset button)
21 Horizontal fine motion screw
22 Horizontal clamp
23 Tribrach clamp
24 Telescope eyepiece screw
25 Telescope focussing ring
26 Sighting collimator
27 Instrument center mark
28 Plate level
29 Plate level adjusting screw
28
29
Keys
Name of Key
Function
{
}
Starkey
Switches to Starkey mode
This mode is used for each presetting or displaying as follows.
1 Contrast of the display, 2 Reticle illumination, 3 Laser pointer, 4 Tilt
correction, 5 Guide light, 6 Set audio mode, 7 Laser Plummet
{
}
Coordinate meas.key Switches to coordinate measurement mode
{
}
Distance meas.key
Switches to distance measurement mode
{ANG}
Angle meas.key
Switches to angle measurement mode
{MENU}
Menu key
Switches to menu mode
Starts measurement applications and performs various settings
{
}
Illumination key
Lights up the display unit and key
Switches the screen/key backlight and Reticle illumination ON/OFF
{
}
Target key
Switches between target types (prism mode/Sheet mode/Non-prism mode
(Reflectorless mode))
{
FUNC
}
Function key
Switches Starkey mode pages (Laser plummet mounted model only)
Keys
Name of Key
Function
{0}
–
{9}
/
{.}
/
{±}
Alphanumeric
characters key
Input letters/figures
For entering alphanumeric characters, see Section 2.4 “How to Enter
Alphanumeric Characters”. in instruction manual.
{ESC}
Escape key
• Returns to the measurement mode or previous layer mode from the mode
set
• Switches to data collection mode or layout mode directly from the normal
measurement mode
• It is also possible to use as Record key in normal measurement mode.
For selecting function of Escape key, see Chapter 17 “SELECTING
MODE” . in Instruction manual.
{B.S.}
Backspace key
Delete a character on the left
{ENT}
Enter key
Selects/accepts input word/value
{
}
Power source key
Turns ON/OFF of power source (Press and hold: About 1 second)
{F1}
–
{F4}
Soft key
(Function key)
Respond to the message displayed
Basic Key Operation
5
Low Temperature
Models only
GM-100_Quick_E.fm 2 ページ ２０１７年５月２２日 月曜日 午後２時５２分
