manualshive.com logo in svg

Topcon FC-2600, Руководство оператора

Поделиться
Скачать
Topcon FC-2600 Скачать руководство пользователя страница 22

Operating the FC-2600

FC-2600 Operator’s Manual

2-2

Front Panel Components

For information on front panel components, see “Front Panel 
Components/Indicators for the FC-2600” on page 1-4 for further 
details.

On/Off Button Operations

The 

On/Off

 button 

 is located at the bottom-left of the front 

panel and functions depending upon the state of the hand-held 
computer when the button is pressed and considering the length of 
time it is pressed. The following is a list of 

On/Off

 button operations:

• Cold Boot

• Suspend

Performing a Cold Boot for the 
FC-2600

To cold boot the FC-2600, press and hold the 

On/Off

 button for about 

10 seconds. This action also terminates running applications and 
stops serial port operations.

Placing the FC-2600 in Suspend Mode

To place the FC-2600 in Suspend mode, press and release the 

On/Off

 

button. Suspend mode allows you to suspend, but not terminate active 
applications. In this mode, the display turns off and the FC-2600 stops 
serial port operations. For battery-powered units, Suspend mode also 
conserves battery power. 

To take the FC-2600 out of Suspend mode, press and release the 

On/

Off

 button again. The display turns on and the device begins running 

any suspended application, but you must restart any serial port 
operations. If you attempt to use the FC-2600 before it has completely 
resumed operations or use it while it is entering Suspend mode, then 
the device will delay three seconds before resuming or suspending.

Содержание FC-2600













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды