10333349-01 Rev A
10
TABLE 2 - Processor block diagram
Supply voltage
The CLOUDLYNK 10, properly connected, will be able to operate in accordance with the
specification when the supply voltage will be in the range of 4,5 – 5,5 Vdc.
The nominal supply voltage will be 5,0 Vdc (USB standard)
Being all USB connectors intrinsically polarized, the power lines are not protected against the
polarity inversion.
Installation – setup
CL10 installation
With mounting arm for RAM
1.
Remove the nuts from the RAM mount.
2.
Place the CL10 arm over the RAM mount, align with the screws and replace the nuts.
3.
Plug the CL10 into the USB port on the rear of the console.
Содержание CL-10 3G
Страница 3: ...10333349 01 Rev A 3 Figure 1 Figure 2...
