Topcon Europe Medical BV
Instruction Manual CC-100XP/ CV-5000PC
36/42
12.1 The Pseudo-Isochromatic Colour Test procedure
To start the Pseudo-Isochromatic Colour test
Figure 43, Start the Pseudo-Isochromatic Colour Test
12.2 Changing the settings of the Pseudo-Isochromatic Colour
Test
Button to
press
Large
Bitmap in
KB-50
Here the Display Sample can be
switched ON and OFF. The sample
display is meant to practice the patient
in the test. The sample test is
indicated by an S.
To switch OFF the sample display.
The test will start without sample
chart.
Here the test procedure can be
switched ON and OFF. When ON the
test procedure will be stopped after
the patient responded correctly to the
first 8 screening charts. If not, the
specific erroneous area will be
examined further, depending on the
patient responses.
