Topcon 1004089-01, Руководство по настройке

Страница: 35 / 58

Chapter 3
– Tuning Preparation
21
WARNING: Ensure there is sufficient space for the
tractor to complete the full maneuver before selecting
next. The calibration will take up to 60 seconds in each of
these full lock modes.
The AES-25 electric steering wheel will slowly turn the
steering to full lock left and then, when next is pressed, to
full lock right.
It is recommended to remove the implement if it is a
trailed, pivoted type implement to avoid possible damage
to the implement or vehicle.
1. From the calibration screen, select the wheel angle sensor
calibration option:

X30: WHEEL ANGLE SENSOR

Universal terminal:
2. Drive the vehicle forward to start the procedure. The wheel angle
sensor calibration should be completed at approximately 2 kph or
1.2 mph. Select next.
The AES-25 motor will move full lock to the left and hold the
wheels in the full lock left position until the vehicle has moved
just over a quarter of a turn. When the left side value has been
calibrated, the console will emit a beep and the AES-25 motor
will stop.
3. Select next.
Note
: If the wheel sensor is in the reversed state (wheel angle
sensor value high 622 or above when wheels are left), a box will
appear indicating that the wheel angle sensor is in the reversed
state and the procedure will repeat.
The AES-25 motor will move full lock to the right and hold the
wheels in the full lock right position until the vehicle has moved
just over a quarter of a turn. When the right side value has been