Topcom DESKMASTER 510i, Руководство пользователя

Страница: 33 / 38

Deskmaster Deskmaster
59
APPENDIX
Modem Commands (AT Commands) “Basic Commands”
A Answer Mode
Bn Select Baud rate(s)
B0 1200 bps B4 19200 bps
B1 2400 bps B5 38400 bps
B2 4800 bps B6 57600 bps
B3 9600 bps B7 115200 bps (default)
D<nb> Dial number <nb>
En Echo Commands
E0 echo off
E1 echo on (default)
Fn Protocol Selection
F1 X.75 (mailbox)
F2 transparent HDLC
Hn Hang up (n will be ignored)
In Product Information
I0 Product Code (“Deskmaster”)
I1 Revision Code
On Switch to On-line Datamode (n will be ignored)
Qx Send Result Codes
Q0 yes (Default)
Q1 no
Sn Read-/Write Register
Sn? Read Register n
Sn=x Write x to Register n
Vn Character or Digit format for the
V0 Digit Format
V1 Character Format (Default)
Wn CONNECT Messages
Xn Selection of the Result Codes
Zn Reset Deskmaster Configuration
Z0 profile 0
Z1 profile 1
58
TROUBLESHOOTER
Symptom Cause
No function • Mains failure. Check if the power supply (220V) of your NT1 box
is connected.
• Error in the line connectors.
No display NT1 box in emergency mode operation (mains failure).
No ringing “Quiet” or “Call Filter” programmed.
An available • Repeat the entry, possibly operational malfunction.
function can- • Feature is not enabled by the ISDN provider. Consult your
not be used provider.
Your partner The Mute function is switched ON ( key during connection).
cannot hear you
No calling partner • Call is not originated from an ISDN access.
number display • Calling partner number suppression is switched ON.
No new • Allowed time expired.
connection at • Wrong connection code entered at pickup attempt.
“Call pickup”
The phone The number in brackets is a cause number according to the
displays an ISDN protocol specification in Q.931, given as hexadecimal value.
error message In some cases, this may be caused by an ISDN feature not yet
such as available in the exchange or a network feature not yet
<01> wrong MSN available in the phone.
This may in particular be the case if the phone is connected to a
PABX with different feature set.
Contact your supplier about the cause number or see the cause list
appended.