Topcom Butler 5500
16
Topcom Butler 5500
8.3.2 Flash time
•
Press
MENU
then scroll to
Base Settings
and press
OK
. Scroll to
Recall Mode
and press
OK
.
•
Press
or
to highlight
Recall 1
for short flash time (100ms) or
Recall 2
for long flash time (250ms) and
press
OK
to confirm.
8.4
SYSTEM PIN
The System PIN is used for registering and deregistering handsets and some other optional settings. The default
System PIN is 0000.
•
Press
MENU
then scroll to
Base Settings
and press
OK
. Scroll to
System Pin
and press
OK
.
•
Enter the current PIN (Original setting 0000) and press
OK
.
•
Enter the new PIN, press
OK
and enter it again.
•
Press
OK
to confirm.
8.5
SIM COUNTRY CODE SETTINGS
You can program the Butler 5500 how to convert telephone numbers stored on your sim card when copying them to
your handset phonebook memory (See § “4 Phonebook” ).
8.5.1 International code
When you program the International code (for example ‘00’ ) all numbers stored in the SIM with ‘+’ will be replaced by
international code ‘00’ when copied to the Butler 5500 handset. If you don’t program the international code, the ‘+’-sign
will not be replaced and will be removed during SIM copy.
•
Press
MENU
then scroll to
Base Settings
and press
OK
. Scroll to
SIM country setting
and press
OK
.
•
Select
International code
•
Enter the international prefix
•
Press
OK
to confirm.
Remark:
If there is no International code programmed or SIM entry doesn’t have a international code, the telephone
number will be copied as it is without any changes. The Country code and National code will be ignored.
8.5.2 Country code setting
When you program the country (for example ‘32’ for Belgium) all numbers stored in the SIM with this country code will
be copied without country code 32 and international code. The national code will be added infront of the telephone
number.
•
Press
MENU
then scroll to
Base Settings
and press
OK
. Scroll to
SIM country setting
and press
OK
.
•
Select
Country code
•
Enter the country code.
•
Press
OK
to confirm.
Remark:
If you add to the country code the area code, both will be removed when copied. This way you can dial
telephonenumbers without area code if needed.
8.5.3 National code
When you program the national code (for example ‘0’) and the programmed country code is matching with the country
code on the SIM, all these numbers will be copied without country code and will have this national code infront of the
telephone number.
•
Press
MENU
then scroll to
Base Settings
and press
OK
. Scroll to
SIM country setting
and press
OK
.
•
Select
National code
•
Enter the national code
•
Press
OK
to confirm.
B5500_Eur.Book Page 16 Tuesday, September 14, 2004 2:26 PM
Содержание BUTLER 5500
Страница 1: ...USER GUIDE HANDLEIDING MODE D EMPLOI BEDIENUNGSANLEITUNG V 1 0 Butler 5500...
Страница 98: ......
Страница 99: ......
Страница 100: ...U8006221...
