4
Topcom Babytalker 2000
Topcom Babaytalker 2000
Do not mix old batteries with new ones.
Keep batteries away from small children
Do not short-circuit & dispose of in fire.
Remove the batteries if this device is not going to be used for a long period.
4.2
Baby unit power supply
1. Connect the small plug of the AC adaptor to the power connector of the baby unit and
the other end of the adapter cable to the electric socket (230V/50Hz).
Only use the enclosed adapter (6V DC / 200mA).
2. Press the On/Off button (14). The power (16) LED will illuminate.
3. Press and hold the On/Off button (14) to switch off the baby unit.
4.3
Parent unit battery Installation
1. Turn the belt clip facing upwards.
2. Turn the screw 90° of the battery cover (11) on the backside of
the parent unit in a counter clockwise direction using a screw
driver. Remove the battery cover (12).
Do not try to rotate the
screw further than the position ‘open’.
3. Install the enclosed 2 AAA rechargeable batteries following the
polarity as shown.
Do not install alkaline batteries!
4. Close the battery compartiment.
5. Press the On/Off button (2). The power LED (7) will illuminate.
6. Press and hold the On/Off button (2) to switch off the parent unit.
+
-
+
-
