GB
22
more than 3 seconds: in confirmation of the operation on the display the message [
UnL
]
appears, flashing, accompanied by 3 short beeps of the buzzer.
Immediately afterwards, the display returns to the indication of the temperature in the cell.
With the keyboard locked, pressing any button, the instrument emits a long beep
indicating the [
Loc
] message on the display.
PROBE READING MANUAL PRINTING: Coupled with the TSP print terminal
Push the
up
and
down
buttons simultaneously and hold down for more than 3
seconds.
The label [
Loc
] is visualised.
Use the
up
and
down
buttons to visualise the [
Prt
] function.
Push the
enter
to confirm the choice and activate the function.
After 30 seconds, if not confirmed, the program exits the function.
PARAMETER CONFIGUTATION
Push the
up
and
down
buttons simultaneously and hold down for more than 3
seconds.
The label [
Loc
] is visualised.
Use the
up
and
down
keys to display the function [
PAr
].
Press the
enter
key to enter the parameter configuration mode.
After 30 seconds if not confirmed the program exits the function.
Enter the password to gain access.
The display shows the password setting mode [
00
]
Use the
up
and
down
keys to select the password “
65
”
Press the
enter
key to confirm your selection.
If the password is correct, the display shows the first parameter in the configuration
list.
Use the
up
and
down
keys to scroll the controller parameters
Press the
enter
key to confirm your selection.
The current value of the parameter selected in flashing mode is visualised.
Use the keys
up
and
down
to select the new value
Press the
enter
key to confirm your selection.
