GB
14
BLOCKIEREN DER TASTATUR
Push the
up
and
down
buttons simultaneously and hold down for more than 3
seconds.
The label [
Loc
] is visualised.
Push the
on/sby/enter
to confirm the choice and activate the function.
After 30 seconds if not confirmed the program exits the function.
To unblock the keyboard push the
buttons simultaneously and hold down for
more than 5 seconds:
to confirm this operation the [
UnL
] will flash on the display.
When the keyboard is blocked the label [
Loc
] will appear on the display when any
key is pressed.
PROBE READING MANUAL PRINTING: Coupled with the TSP print terminal
( only on -25° C / -15° C and -22° C / + 5° C units)
Push the
up
and
down
buttons simultaneously and hold down for more than 3
seconds.
The label [
Loc
] is visualised.
Utilise the
up
button to visualise the [
Prt
] function.
Push the
on/sby/enter
to confirm the choice and activate the function.
After 30 seconds, if not confirmed, the program exits the function.
PARAMETER CONFIGUTATION
Push the
up
and
down
buttons simultaneously and hold down for more than 3
seconds.
The label [
Loc
] is visualised.
Use the
up
and
down
keys to display the function [
PAr
].
Press the
on/sby/enter
key to enter the parameter configuration mode.
After 30 seconds if not confirmed the program exits the function.
Enter the password to gain access.
The display shows the password setting mode [
00
]
Use the
up
and
down
keys to select the password “
65
”
Press the
on/sby/enter
key to confirm your selection.
If the password is correct, the display shows the first parameter in the configuration
list.
Use the
up
and
down
keys to scroll the controller parameters
