6.
Installation and First Operation of Your Appliance
Take off and remove all package materials and lower wooden pallet of your product before placing it. (It may be
required to lift the cooler to remove the base bracket).
Install spare parts provided inside your appliance (Wire racks, Rack bars, etc.) as per the installation instructions. Use
only genuine TOPCOLD spare parts. Non-genuine spare parts may cause risks for you and may damage your product.
Place your product where you desire. Consider the placing rules specified in the manual during placement.
Level your product laterally and vertically with a spirit level. Perform the levelling procedure with the adjustable legs
on the front lower part of your cooler. (Fig. 1)
For models with castors (optional), castor brakes (optional) shall be locked after placing the products or if no castor
brake is available, it shall be ensured that the appliance does not move.
•
Place your cooler by pushing it rearward.
•
Place your product so that it is inclined in any way and that it is standing on its legs or castors and then
operate it.
•
Make sure that you do not close the fan intake outlet while placing products inside the cooler.
•
Do not place your product outdoors so that it shall be exposed to weather conditions. (on a street, lane,
etc.)
•
Do not place materials such as cardboards, boxes, etc. in front of the lower blinds to ensure proper cooling
of your product.
•
Do not expose to direct sunlight. Operating period shall be increased if sunlight hits the glass of your cooler.
And this means that the power consumption shall be increased.
•
Make sure that there is a clearance of 150 mm (15 cm) between the wall and the rear side of your cooler
when you are bringing the product close to the wall. Air circulation should be ensured at the rear area of the
coolers for efficient use.
•
Your cooler provides best cooling performance in the conditions specified below as per the climate class.
Thus, ensure that the environment where your cooler shall be used conforms with this temperature ranges.
Fig. 1
Your product provides best cooling performance in the conditions specified below as per the climate class.
Thus, ensure that the environment where your product shall be used conforms with this temperature ranges.
For Commercial Products:
Climate
Class
Temperature
Range
Humidit
y
Class 3
16 °C to 25 °C
60% Rh
Class 4
16 °C to 32 °C
65% Rh
Class 5
16 °C to 41 °C
70% Rh
