USER’S GUIDE
Model T-S261-HSB
SignatureGem HSB
Getting Started
Thank you for making the SignatureGem™ your signature capture
device of choice. SignatureGem is a rugged desktop electronic signa-
ture capture tablet with unique simultaneous ink-on-paper capablility,
designed to function on your sektop or for portability for field use.
SignatureGem requires that SigPlus
®
software (enclosed on CD-ROM
with installation instructions on following pages) is installed on your
computer to function correctly.
To capture electronic signatures, make sure that the plastic stylus tip is
installed in the pen and sign anywhere on the tablet surface to record a
signature. To capture an electronic signature while retaining an ink-on-
paper record, insert paper atop the signing surface, using supplied
paper guides if applicable. Make sure the inking tip is installed in the
pen and sign on the paper. While the ink tip is recording the signature
on the paper, the tablet is capturing the signature to the computer for an
instant paperless copy of the transaction.
Topaz Systems, Inc.
650 Cochran Street Suite 6, Simi Valley, CA 93065
phone (805) 520-8282 fax (805) 520-0867
www.topazsystems.com
Declaration of Conformity
In accordance with FCC rules. Tested to comply with FCC standards. For Home or Office
use. Code of Federal Regulations. FCC Part 15, Subpart B
Manufacturer:
Topaz Systems, Inc.
650 Cochran St Suite 6
Simi Valley, CA 93065
Type of Equipment:
Signature Capture Tablet and Pen
Model Number:
SignatureGem, T-S261
Report Number:
A00207F1
Year of Manufacture:
2003
I, the undersigned, hereby declare that the equipment specified above conforms to the above
standard.
Topaz Systems, Inc
650 Cochran St unit 6
Simi Valley, CA 93065
February 9, 2000
Anthony E. Zank, President
Test Facility
Compatible Electronics
2337 Troutdale Drive
Agoura, CA, USA, 91301
INSTRUCTIONS REGARDING RADIO AND TV INTERFERENCE AND CABLES
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device,
pursuant to FCC rules. In order to maintain compliance with FCC regulations, shielded cables
must be used with this equipment. Operation with non-approved equipment or unshielded
cables is likely to result in interference to radio and TV reception. The user is cautioned that
changes and modifications made to the equipment without the approval of manufacturer could
void the users authority to operate this equipment.
Software installation
IMPORTANT NOTE: DO NOT INSTALL SIGPLUS SOFTWARE IF YOU
ARE AN END-USER AND HAVE RECEIVED A SIGNATURE CAPTURE
APPLICATION PROGRAM FROM YOUR COMPANY.
The SigPlus electronic signature software allows for versatile signature-
capture operation with Windows 95, 98, NT, 2000, or XP. To install the
SigPlus ActiveX software suite, run “sigplus.exe,” provided on the
enclosed Topaz Software CD. During installation, you will be asked to
select the tablet type (tablet model= ‘SignatureGem 1X5’), and the
connection type. Make sure you select the connection option “USB type
with -HSB tablet.”
Topaz offers a wide range of bundled software, all of which is capable of
capturing signatures and storing them as encrypted and bound elec-
tronic signatures, image files, image-free Topaz forensic “.sig” files.
Dozens of unique software plug-ins, demos, and developer tools and
source examples are available for download on the Topaz website (
http://
www.topazsystems.com/Software/
).
