Page
46
of
51
DNS Address:
Network Domain Name Server address.
MAC Address:
The camera‟s MAC address.
Submit & Cancel Buttons:
Apply or cancel the changes made to the LAN Settings section.
Port Settings:
The Port Settings section allows you to adjust the network ports of the camera.(Suggest: not to modify)
HTTP Port:
This port is used for HTTP-CGI control, and for the web application. Default: 80.
RTSP Port:
This port is used for the RTSP streaming protocol. Default 554.
PTZ Port:
This port is used for the TCP/IP control protocol. Default: 5678.
UDP Port:
This port is used for the UDP control protocol. Default: 1259
Sony VISCA:
This port is used for the Sony VISCA protocol. You cannot change this port number.
SRT Settings:
The Secure Reliable Transport protocol settings section allows you to adjust the SRT settings of the camera.
SRT:
Enable / Disable SRT
SRT Port:
This is the port used for the SRT protocol. Default: 4578.
SRT Encry:
Enable / Disable SRT Encryption. Options include: Off, AES-128, AES-192, AES-256
SRT Password:
Change the SRT Password when SRT Encryption is enabled. Default: 1234567891
RTMP Settings:
The RTMP(S) Settings section allows you to enable or disable the two (2) RTMPS stream‟s video and
audio sources.
First Stream:
Enable / Disable Stream 1 Video & Audio
(First Stream) MRL:
Text field for RTMPS Stream 1‟s Media Resource Locator (MRL)
Second Stream:
Enable / Disable Stream 2 Video & Audio
(Second Stream) MRL:
Text field for RTMPS Stream 2‟s Media Resource Locator (MRL)
RTSP Settings:
The RTSP Settings section allows you to enable or disable RTSP Authorization.
RTSP Auth.:
Enable / Disable RTSP authorization.
ONVIF Settings:
The ONVIF Settings section allows you to adjust the ONVIF settings of the camera.
ONVIF:
Enable / Disable ONVIF protocol control.
ONVIF Auth.:
Enable / Disable ONVIF authorization.
Multicast Settings:
The Multicast Settings section allows you to adjust the Multicast settings of the camera.
Multicast:
Enable / Disable the Multicast protocol.
Address:
Adjust the Multicast address.
Port:
This port is used for the Multicast protocol. Default: 6688.
NTP Settings:
The NTP Settings section allows you to enable / disable the Network Time Protocol of the camera.
Time Zone:
Adjust the time zone you wish to use with NTP.
NTP Time Sync:
Enable / Disable NTP Time Sync
Server Address:
Text field for NTP server.
Time Interval:
Adjust the Time Interval in minutes. Default: 1440
Содержание T7E-SDI Series
Страница 19: ...Page 16 of 51 Dimensional Drawings mm...
