Page
14
of
51
4.
BACKLIGHT. L/R SET and P/T RST Controls
Reverse Pan controls direction: Press and hold [L/R SET]
button while pressing [1]
aka [STD]
button for normal
pan controls. Press and hold [L/R SET] button while
pressing [2]
aka [REV]
button for reversed pan controls.
Backlight Compensation Control: Press [BACKLIGHT]
button to enable backlight compensation. Press it again to
disable backlight compensation. (Note: Backlight is only
effective in full auto exposure mode)
Pan Tilt Control Self Calibration: Press [P/T RST] button
to recalibrate the Pan and Tilt limits.
5.
Standby Control
Press [
] button to put camera in „standby‟ mode. In
standby mode the camera will provide no image, respond
to no commands and use less than half its normal power.
Press [
] button again to put camera in normal mode.
6.
Presets - Setting and Clearing
1.
To store a preset position: The user should manually
setup the desired shot using the Pan Tilt and Zoom
controls. Press the [PRESET] button first and then press
the numeric button [0-9] to which you want to assign the
shot. Ten total preset positions (0-9) are available from
the IR remote control (255 available via RS232/RS485/IP
Interfaces).
2.
To erase the memory content of a preset position: The
user should press the [RESET] button first and then press
the numeric button 0-9 associated with that preset.
Note:
Pressing [*] + [#] + [RESET] in sequence will erase
all presets in the memory.
Содержание T7E-SDI Series
Страница 19: ...Page 16 of 51 Dimensional Drawings mm...
