TOP CAT 54VB Скачать руководство пользователя страница 12

Страница: 12 / 12

2) Direct injection of oil into the tool

A simple and easy way to ensure proper lubrication is to inject the oil directly into the tool air inlet.

This should be performed prior to storage of the tool. To perform this task one must have a small

container of the proper lubricating oil.

● Disconnect the tool from the air supply at the air coupling.

● Place a few drops of oil from the container into the air inlet of the tool directly.

● Reconnect the tool to the air supply.

● Direct the exhaust of the tool away from any bystanders or cover the exhaust with a shop rag.

● Run the tool until the oil has completely passed through the unit.

The best lubrication techniques include both methods.

What Conditions Indicate the Need for Maintenance?.

Pneumatic tools will exhibit several distinct signs that maintenance is required. Higher costs can

be avoided if maintenance is performed when the ﬁrst signs are evident. The following list details

conditions that may indicate the necessity for service.

1) With the tool disconnected from the air supply, grasp the spindle and spin in the direction of

operation. The spindle should spin freely with no resistance.

2) With the tool disconnected from the air supply, grasp the spindle by hand. Attempt to move the

spindle from side to side and back and forth. Excess play can be a sign that service is required.

3) A reduction in power may indicate the necessity for maintenance.

4) Should the tool not maintain a uniform operating speed, servicing may be required.

For More Information

1) General Industry Safety & Health Regulations 29 CFR, Part 1910 and where applicable

Construction Industry Safety & Health Regulations 29 CFR, Part 1926 available from Superintendent

of Documents, Gov’t. Printing Ofﬁce, Washington, D.C. 20402.

2) Safety Code For Portable Air Tools, ANSI B186.1, B7.1 and Z87.1, available from American

National Standards Institute, Inc. 1430 Broadway, New York, NY 10018

• Vertical Grinders

• Horizontal Grinders

• Right Angle Grinders

• Die Grinders

• Extended Grinders

• Bench Grinders

Grinders

• Vertical Polishers

• Horizontal Polshers

• Right Angle Polishers

Polishers

• Scalers

• Needle Scalers

• Chipping Hammers

• Rammers

Percussion Tools

T.C. Service Co.

38285 Pelton Rd.

Willoughby, OH 44094

U.S.A.

Ph: 440-954-7500

Fax: 440-954-7118

Air Motors

Saws

Содержание 54VB













Результаты поиска

Содержание 54VB

Отзывы:

Бренды по названию

Популярные бренды

TOP CAT 54VB, Инструкция по эксплуатации и техническому обслуживанию для операторов

Результаты поиска

Содержание 54VB

Отзывы:

Бренды по названию

Популярные бренды