7
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above
of this instruction sheet you will find an explosion drawing with all single parts (marked
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FIG.2:
Slide the seat post (12) into the vertical
Seat post (10) and, at the desired
position, align holes and fix in place with
the Locking Knob (25) and flat washer
(26). Now fix the Seat (13) to the seat
post (12) as shown.
Insert the vertical
Seat Post (10) into the main frame (16)
and line up the holes. Secure the
saddle in position with the Adjustment
Knob (7). The correct height for the seat
can be adjusted after the bike is fully
assembled.
FIG.1:
Attach the Front Stabilizer (pt.15)
to the Main Frame (pt.16) using two
sets of Ø8 Flat Washers (pt.5), M8
Domed Nut (pt.6) and M8*42 Carriage
bolt (3).
Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of
Ø8 Flat Washers (pt.5), M8 Domed Nut
(pt.6) and M8*42 Carriage bolt (3).
Содержание SRX40S
Страница 1: ...Ed Rev INSTRUCTION 09 18 GRLDTOORXSRX40S 00 ...
Страница 2: ...4 EXPLODED VIEW PARTS LIST ...
