10
COMPUTER INSTRUCTIONS
A. Power up:
a. Connect all of the cables to the monitor.
b. After power up, all LCD segments will light up for 2 seconds and CPU will be reset the
resistance into level 1. The monitor will go to initial mode.
If the connection cables were installed incorrectly, motor will not run. Before asking
service, please examine if all connection cables are well connected and then reset the
power to release the beep sound or press “ START / STOP (Hold to reset) “ button to
restart system. If the motor still don't run, please call service..
B. KEY FUNCTION:
a. START/STOP:
1. To start or pause exercising .
b. FUN/SCAN:
1. Stop condition, press this button to enter parameters Settings
2. Confirm the set values of the parameters and into the next parameter Setting
3. The START state, press this button displays the current fixed parameter values, and
then press the switch for automatic scanning function parameters display
c.
○
,
+
▲
:
1. In the condition of parameter Settings, increase to adjust parameter values
2. In the START state, increase the resistance movement
d.
○
,
-
▼
:
1. In the condition of parameter Settings, reduce to adjust parameter values
2. In the START state, reduce the resistance movement.
e. PROG/RESET:
1. STOP state, select the user required movement patterns
2.
Any state, long press this button for 5 seconds, electronic watch reset, in addition to
the ODO reset all data
f. A key combination: FUN/SCAN and at the same time the UP (+) button for 3 seconds, into the
introspection of the motor
g. Key combination 2: at the same time, the PROGRAM and the DOWN (-) button for 3 seconds,
examined the ODO values
Содержание ROWER ACTIVE PRO
Страница 1: ...Ed 09 17 Rev 00 INSTRUCTION...
