(9) BODY FAT
-
9-1 This function is valid after user stops pedaling (or press “STOP”).
9-2 A continuous RPM signal input is required during BODY FAT test.
9-3 Press “BODY FAT”, console system will display “UX” for two seconds and start the body fat
measurement process and will show results of FAT% and BMI on screen 8 seconds later.
9-U Press “BODY FAT” and hold for two seconds to enter user profile to reset SEX, AGE, HEIGHT,
and WEIGHT. Press “ENTER” to start body fat measurement process.
9-5 If LCD displays following messages:
“E-1”- When there’s no heart rate signal input detected; or
“E-U” – When FAT% result exceeds 5~50 and BMI result exceeds 5~50.
(10) RECOVERY
-
10-1 RECOVERY function is valid when there’s a heart rate value input detected (during exercise
or after user presses “STOP”).
10-2 Press “RECOVERY” and LCD will display TIME “0:60” counting down with user’s actual
heart rate value showing in the PULSE column.
10-3 When TIME reaches to “0:00”, LCD will have result “FX” (X=1~6) displaying in the
alphanumeric section.
10-U Press “RECOVERY” again and return to previous mode during or after RECOVERY test’s
occurred; LCD will continue displaying user’s actual heart rate value on screen.
5
