TOORX BRX AIR300, Инструкция

Страница: 20 / 22

21
⑧
Press any PROGRAM key then perform the program accordingly.
3.6 Target Distance mode:
①
In standby mode, press Target Time key and TIME will light up, along with a long sound for 1s.
②
DISTANCE val ue is flashing, press UP and DOWN to adjust (Figure 41). Press ENTER to confirm meanwhile buzzer
beeps 1s andDISTANCE lasting lighting up.
③
Preset DISTANCE value counts down , TIME, CALORIES, WATTS, SPEEED, RPM start to count up. (Figure 42)
④
Press START button once enter into PAUSE mode,Buzzer will sound for 0.5s per second within 30s. All values are
displaying on LCD and flashing in every 2s. If continue to stop training for 5 minutes, buzzer sounds 2s and enter to
Wake-up mode. Press START to resume workout.
⑤
No signal input for 30s, buzzer sounds 1s and enter to Wake-up mode.
⑥
Press STOP key or end up training, TIME will display total workout time; DISTANCE will display total workout
distance; CALORIES will display total consumption during workout; WATT, SPEED and RPM will switch to display
AVG. & MAX. PULSE window will switch to display 65%, 85% MAX (Figure 21~23) each 5s.
⑦
With pulse signal input, PULSE window will display user actual pulse. Pulse
window displays nothing if no pulse signal input (Figure 19~20).
⑧
Press any PROGRAM key then perform the program accordingly.
3.7 Target Calories mode:
①
In Standby mode, press Target Calories key and CALORIES will light up, along with a long sound for 1s.
②
CALORIES value is flashing, press UP and DOWN to adjust (Figure 43). Press ENTER to confrim meanwhile buzzer
beeps 1s and
CALORIES lasting lighting up
③
Preset CALORIES value counts down , TIME, DISTANCE, WATTS, SPEEED & RPM start to count up.(Figure 44)
④
Press START button once enter into PAUSE mode,Buzzer will sound for 0.5s per second within 30s. All values are
displaying on LCD and flashing in every 2s. If continue to stop training for 5 minutes, buzzer sounds 2s and enter to
Wake-up mode. Press START to resume workout.
⑤
No signal input for 30s, buzzer sounds 1s and enter to Wake-up mode.
⑥
Press STOP key or end up training, TIME will display total workout time; DISTANCE will display total workout
distance; CALORIES will display total consumption during workout; WATT, SPEED and RPM will switch to display
AVG. & MAX. PULSE window will switch to display 65%, 85% MAX (Figure 21~23) in each 5s.
⑦
With pulse signal input, PULSE window will display user actual pulse. Pulse window
displays nothing if no pulse signal input (Figure 19~20).
⑧
Press any PROGRAM key then perform the program accordingly.