4
1 Front Guard
2 Rim Hook
3 Clamp
4 Spinner
5 Fan Blades
6 Locking nut
7 Rear Guard
8 Handle
9 Motor Shaft
10 Motor housing
11 Oscillation knob
12 Fan assembly
13 Power Cord
14 Retaining Screw
15 Retaining Nut
16 OFF & Speed Buttons
17 Base
18 Base screw
FAN ASSEMBLY
1. Remove(unscrew) the back base located on the motor housing.
2. Place the rear guard on the motor housing. Re-attach and tighten the back base.
3. Place the fan blade on the motor shaft.
4. Remove the screw on the front guard and open the clamps on the front guard. Align the front guard
with the back base. Tighten the screw on the front base and tighten the clamps.
5. Place the fan on the base tighten and secure with screw.
