3
OPERATION
1. Place the fan on a dry and firm level surface.
2. Unwind the power cord and plug the cord into an electrical outlet.
3. Turn the fan ON by pressing the desired speed setting (1 - Low, 2 - Medium and 3 - High).
4. To adjust the fan angle, tilt the motor housing up/down until it clicks into position.
5. To adjust the height, loosen the height adjustment knob, then raise or lower the extension pole to the desired
height and tighten the height adjustment knob.
6. To start/stop oscillation, push/pull the Oscillation knob.
Warning: Always unplug the product from the electrical outlet when not in use.
USER SERVICING INSTRUCTIONS
1. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
2. The replacement of fuse:
a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades, Remove fuse
carefully. Push the fuse from the other side or turn fuse holder over to remove fuse.
c) IMPORTANT - Risk of fire. Replace fuse only with 2.5AMP, 125 Volt fuse.
d) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
