19
CARE AND CLEANING
1. Maintenance
Note. This product does not contain any parts
that can be repaired by the consumer. Contact
an authorised service centre or a similarly
qualified person to have it checked and repaired.
a. Replacing the spool
NOTE: Before replacing the spool, make sure the
mains plug is disconnected from the unit.
1) Press together both locking device tabs on the spool cover
and remove the cover.
2) Remove the old spool from the spool cover.
3) Clean out any dirt or grass residue.
4) Put the new spool in the spool housing, thread the line into
the hole.
b. Winding the line
NOTE: Should you wish to wind the line yourself,
the instructions are provided below:
Self-winding, however, is NOT recommended
because if the line is not wound properly it can
cause the trimmer’s feed system to malfunction.
For this reason, users are strongly urged to
purchase the pre-wound spool.
1) Hold the loose ends of the line together with one hand, find
the center of the line with the other hand and hook this center
loop into the groove on the spool.
2) Wind the line following the directional arrows on the spool
housing and hook the two ends into the side grooves.
