10
5. Before using the product and after any impact, check for
signs of wear or damage and repair as necessary.
6. Always disconnect the product from the power supply
(i.e. remove the plug from the power supply or the battery
pack)
– whenever leaving the product unattended;
– before clearing a blockage;
– before checking, cleaning or working on the product
– after striking a foreign object;
– whenever the product starts vibrating abnormally.
7. Take care against injury to feet and hands from the cutting
attachment.
8. Always ensure that the air vents are kept clear of debris.
9. Take care against injury from any device fitted for trimming
the filament line length, if applicable. After extending new
cutter line always return the product to its normal operating
position before switching on.
10. Never fit metal cutting elements.
11. Never replace non-metallic cutting means with metallic
cutting means.
12. Never use replacement parts or accessories not provided
or recommended by the manufacturer.
13. The product should be supplied via a residual current
device (RCD) with a tripping current of not more than 30
mA.
14. Avoid using the product in bad weather conditions
especially when there is a risk of lightning.
15. Position the cord so that it will not be caught by the cutting
