NOTE!
Only use special wax and polish suitable for
machines. Make sure that the workpiece to
be machined never comes into contact with
the polishing / grinding plate.
Sanding and polishing
• Mount the required sanding attachment on the
polishing / sanding plate.
• Switch on the product and run it with moderate
pressure on the workpiece using circular,
transverse or longitudinal movements.
• Mount the required polishing attachment 10
on the polishing / sanding plate.
• Make sure that the selected polishing
attachment is not contaminated and always
mounted exactly in the centre on the polishing
/ sanding plate.
• Check if the polishing attachment is firmly
attached before switching on.
• Switch on the product and run it with moderate
pressure on the workpiece using circular,
transverse or longitudinal movements.
Sanding
Polishing
For sanding, use the appropriate sanding papers
11 . The various sanding attachments are easy to
change by means of the Velcro.
For rough finish, a coarse grit and for fine finish
a fine grit is recommended. The optimum grit can
be determined by carrying out a sanding test.
For polishing, use the appropriate polishing
attachments 10 . The various polishing
attachments are easy to change by means of the
Velcro.
Work instructions
CAUTION!
Do not apply excessive force on the
product.
Excessive pressure may damage
the product or its accessories and increases
the risk of injury.
For this reason is it
important to always grip the product
firmly with two hands and maintain a
stable posture.
Always secure your workpiece in a vice or
in any other clamping device for sanding.
Secure particularly large workpieces
against sliding or support them properly.
Selecting the appropriate sanding
as you need
