Additional safety instructions for
sanding
Additional safety instructions for
polishing
a.
Do not use excessively oversized
sanding disc paper. Follow
manufacturers recommendations,
when selecting sanding paper.
Larger
sanding paper extending beyond the
sanding pad presents a laceration hazard
and may cause snagging, tearing of the
disc or kickback.
a.
Do not leave any loose parts of the
polishing cover, especially fastening
cords. Stow or shorten the fastening
cords.
Your fingers or the workpiece may
get caught in loose, rotating fastening
cords.
Safety instructions for chargers
a) Never connect a battery pack that is
damaged in any way to the charger.
There is a danger of electric shock.
b) Do not misuse the charger! The charger
is only intended for charging the
battery pack Mod. XW-120302C, 2000
mAh.
Misuse may result in fire or a fatal
electric shock.
c) WARNING! Do not charge non-
rechargeable batteries with the
charger.
Not following this instruction
results in hazards.
d) Damaged mains plug or connecting
cables have to be replaced by the
manufacturer of the power tool or
his customer service department to
prevent hazards.
e) The charger, but not the cordless
drill, can be operated by children
from 8 years of age and above, as well
as by people with reduced physical,
sensory or mental capacities or who
lack knowledge or experience, if they
have been supervised or instructed
regarding safe use of the device, and
understand the resultant dangers.
Children should not play with the
device. Cleaning and user maintenance
shall not be performed by children
without supervision.
f) Do not expose the cordless drill and
the charger to rain or moisture.
Water
ingression can result in an electrical
shock and damage the device.
