ToolPRO CP18BD.9, Инструкция по эксплуатации

Страница: 13 / 20

Customer Helpline 1300 889 028
13
Operating Instructions
Light Status
Red on
Charging
Green on
Fully Charged
Light off Defective Battery
CHARGER ACG18LD / ACG18LD3
Do not use any charger other than that specifically provided for use with the equipment.
If the battery pack is very hot you must remove your battery pack from the charger and
allow time for the battery to cool down before recharging.
Please charge the battery to reach full before storage. If the tool will not be used for long
periods of time, charge the battery every 3 months.
CHARGING PROCEDURE (SEE FIG. C2-C4)
1) Plug the charger into an appropriate outlet. The light will be green.
2) ) Slide the battery pack into the charger, make sure the battery is in the correct charge
position firmly. the light will turn to red to indicate the charging process has started.
3) When charging is completed, the light will turn to green.
4) After fully charged, unplug the charger and remove the battery pack.
Red light Green light
C2
C4
C3