ToolPRO CP18BD.9, Инструкция по эксплуатации

Страница: 12 / 20

Customer Helpline 1300 889 028
12
Operating Instructions
2.BEFORE PUTTING INTO OPERATION
WARNING:
The charger and battery pack are specially designed to work together so
do not attempt to use any other devices. Never insert or allow metallic objects into your
charger or battery pack connections because of an electrical failure and hazard will occur.
CHARGING THE BATTERY PACK
CHARGER ACG318GL
NOTE:
a) Do not use any charger other than that specifically provided for use with the
equipment.
b) If the battery pack is very hot you must remove your battery pack from the charger and
allow time for the battery to cool down before recharging.
c) The battery in your new tool is not charged when it leaves the plant. Therefore it must
be full charged before using the first time.
d) Please charge the battery to reach full or no less than half charge before storage. If the
tool will not be used for long periods of time, charge the battery every 3-6 months.
CHARGING PROCEDURE (SEE FIG. C1)
1) Plug the charger into an appropriate outlet. The light will be green.
2) Slide the battery pack into the charger, the light will turn to red to indicate the charging
process has started.
3) When charging is completed, the light will turn to green. The pack is now fully charged,
unplug the charger and remove the battery pack.
WARNING: When battery charge runs out after continuous use or exposure to
direct sunlight or heat, allow time for the battery to cool down before re-charging
to achieve the full charge.
CHARGING INDICATOR
This charger is designed to detect some problems that can arise with battery packs.
Indicator lights indicate problems (see table below). If this occurs, insert a new battery pack
to determine if the charger is OK. If the new battery charges correctly, then the original
pack is defective and should be returned to a service center or recycling service center.
If the new battery pack displays the same problem as the original Battery Pack, have the
charger tested at an authorized service center.
C1