ToolPRO 2200W, Инструкция по эксплуатации

Страница: 12 / 24

12 13
7. Slowly turn choke to OPEN / RUN by sliding the
choke lever to the right, Pic. 10.
8. Check that the only illuminated light is the green
output power light. The generator will be running and
ready for use.
WARNING! Before connecting any electrical load to
the generator ensure that the load does not exceed the
maximum load as stated on the rating plate and also
check page 13 for extra details.
Ensure that the mains supply lead is long enough to
reach the generator without any strain.
STOPPING YOUR GENERATOR
Warning! Never stop your generator with electrical
appliances or power leads attached. Always remove
power leads and appliances before stopping your
generator.
WARNING! In case of emergency, the easiest way to
stop the generator is to directly turn engine switch to
OFF position.
Avoid doing so in non-emergency circumstances as it
carries the risk of damaging the generator.
1. Ensure all power leads and appliances have been
switched off and disconnected from the generator
power socket.
2. Allow generator to run for 1-2 minutes, this allows the
generator to cool down.
3. Switch engine switch to OFF, Pic. 11.
4. Turn the fuel tap to OFF, Pic. 12.
CHOKE
OPEN CLOSED
PIC. 10
START
RUN
PIC. 11
ON
OFF
O
FF
ON
PIC. 12