Toolots JLH-33, Инструкция по эксплуатации

Страница: 36 / 59

4 、 Instruction Manual
34
Diameter setting of saw wheel: in order to display the data of "saw blade speed" correctly
on the screen of each function, the diameter parameter of saw wheel must be set correctly
here before it can be used normally.
Rated
current of saw wheel:Enter the rated current of saw wheel motor here.Obtain the current value of
each gear.
Cylinder feeding stroke: for long size workpiece, the system will automatically feed the
material several times to reach the set size.A single feeding stroke is set here, generally
the effective stroke of the cylinder (unit: mm).
Positioning buffer stroke:The machine tool is equipped with buffer device for more accurate size
positiomimg.Return positioning is divided into two sections--quick and slow,therefore,a stroke at the positioning
end needs to make the buffer device act,and the action distance of the buffer device is set here.
Process selection in clamp: this function is optional. It is closed when " × " is
displayed and opened when " √ " is displayed.When the function is on, when the saw frame feed
reaches the lower limit position, the main clamp loosen and then rise.When the function is
off, the main clamp keep clamping and rise when the saw frame feed reaches the lower limit
position.
"Default value" : long press 1 second to restore all parameters to factory Settings.
Belt gear position:Input the current gear according to the actual pulley gear