Toolots JLH-33, Инструкция по эксплуатации

Страница: 27 / 59

4 、 Instruction Manual
25
4.2.4.2
Data setting: click this button to switch to the processing data setting screen (as shown in the right
picture).
This screen mainly completes the setting, adjustment and monitoring of each workpiece data in the process
of processing.
The size (mm) and quantity of the workpiece to be machined must be set before automatic cutting function
is enabled.
According to the user's daily processing requirements for various specifications of the
workpiece, the system designs the processing data always in the order of "the first set" to
"the fifth set ”
The method of input value is: touch the data input area, and the
human-machine interface will automatically pop up a numeric input keyboard
(as shown in the figure on the right) to easily input the required data.
Pay attention to the input range prompted by the top of the keyboard,
beyond which the man-machine will not accept
Gating: each set of data has a gating button, which is crucial.