Toolots AD-005, Руководство по эксплуатации, Страница: 7 / 20

Method of Installation (Power Distribution)
-6-
Electric Features of Dryer
Model
AD-005 AD-005 AD-010 AD-010 AD-015 AD-020 AD-030 AD-040 AD-050
Power
Supply
Distribution Lines
1. Select materials like lead wires with proper diameters and capacity
in accordance with the above table.
2. Power cable should go through the round hole at the bottom of the
electric control cabinet. Use proper tools to connect it to the terminal
of the lead wire and fasten it tightly at one side of the terminal.
3. Check power supply and voltage to be connected to make sure it is
within the range of 5% of rated voltage (see the nameplate).
4. Do not share the same protection switch with other equipment.
5. Install an extra proper protection switch from electric leakage in
accordance with the aforementioned electric properties.
6. Ensure to connect to the grounding wire properly.
Running
Ampere
Diameter of
Power Cable
Capacity
2.3 A 4.5 A 2.8 A 5.5A 3.2 A 3.6 A 5.5 A 7.0 A 8.5 A
1 220 V / / Hz
60
50
1 110 V / 60 Hz
1.25mm
2
above 2.0mm
2
above
2P/10 A 2P/15 A
AD-060
11.0 A
3.5mm
2
above
2P/20 A
AD-075S AD-100SAD-150S AD-200S AD-300S AD-400S AD-250S
7.8A 11A 15A 20A 29A 34A 23A
3 220 V / / Hz
60
50
5.5mm
2
above 14mm
2
above
3P/20 A
3.5mm
2
above
3P/30 A 3P/75 A
Model
Power
Supply
Running
Ampere
Diameter of
Power Cable
Capacity