ToolMaster TM-U3, Инструкция по эксплуатации

Страница: 27 / 36

MILLING CUTTER ATTACHMENT
Remove the orgininal work head from the dove tail slide by loosening knurled screwsT5 and S1 Slide
the milling cutter attachment into the dovetail and secure with screws T5 and S1
Milling cutters must be sharpened occasionally to keep them in good operating condition. When grind-
ing milling cutters, care must be exercised to maintain the proper angles and clearances of the cutter.
Improper grinding can result in poor cutting edges, lack of concentricity, and loss of form in the case of
formed tooth cutters. Milling cutters cannot be sharpened by offhand grinding. A tool and cutter grind-
ing machine must be used.
Sharpening The Ends of End Mills and Slot Drills
Select the suitable collet to hold the shank of the End Mill or Slot Drill. Put collet into the sleeve,and
then rotate the sleeve to lock it firmly as Figure 1.
Fig.1
Loosen the positioning screw of the tooth rest,and then adjust the tooth rest to the position where
the cutter will not-touch the pointer when the sleeve is pulled all the way back as in Fig.2.
Fig.2